Proprietary SFP transceivers from major networking brands are expensive — and often unnecessarily so. The XZSNET 1000BASE-LX SFP Transceiver 2-Pack is the compatible alternative — 1.25G single-mode LC fibre modules that work across Cisco, Ubiquiti UniFi, Mikrotik, Meraki, Netgear, and D-Link hardware, at a fraction of the cost of proprietary modules.
What Makes the XZSNET Stand Out?
- 1000BASE-LX standard — the industry-standard protocol for reliable long-range single-mode fibre communication
- 1.25G data rate — Gigabit Ethernet over single-mode fibre
- LC connector — the standard connector for single-mode fibre in enterprise and prosumer networking
- Broad compatibility: Cisco GLC-LH-SMD, Ubiquiti UniFi UF-SM-1G, Mikrotik, Meraki, Netgear AGM732F, D-Link — works across major brands in a mixed-vendor environment
- 2-pack — two modules for a complete point-to-point fibre link
Technical Overview
The 1000BASE-LX standard uses a 1310nm laser over single-mode fibre for long-distance Gigabit Ethernet transmission. Key specifications:
- Wavelength: 1310nm
- Fibre type: Single-mode (SMF)
- Connector: LC duplex
- Data rate: 1.25Gbps (Gigabit Ethernet)
- Typical range: Up to 10km on single-mode fibre
Real-World Usage Situations
🏢 The Enterprise Network
Enterprise networks frequently use mixed-vendor hardware — Cisco switches in the core, Ubiquiti access points at the edge, Mikrotik routers for WAN connectivity. The XZSNET’s broad compatibility across all these brands makes it the practical choice for a mixed-vendor environment, eliminating the need to stock multiple proprietary modules.
🏠 The Home Lab
Network enthusiasts building home labs with enterprise-grade hardware benefit from compatible SFP modules that work with their existing switches and routers without the cost of proprietary alternatives. The XZSNET 2-pack provides the two modules needed for a complete fibre uplink between two devices.
🏗️ The Building-to-Building Link
Connecting two buildings with a fibre run requires SFP transceivers at each end. The XZSNET 2-pack provides both modules for a complete point-to-point link, and the 1000BASE-LX standard’s long-range capability (up to 10km on single-mode fibre) covers virtually any building-to-building distance.
💻 The Network Upgrade
Upgrading a network switch’s uplink from copper to fibre requires SFP transceivers. The XZSNET’s compatibility with Cisco, Ubiquiti, Mikrotik, and other major brands means it works with the switch you already have, and the 2-pack provides the modules for both ends of the fibre link.
Excellent Value at £30.11
Proprietary 1000BASE-LX SFP modules from Cisco (GLC-LH-SMD) retail at £80–120 each. Ubiquiti’s UF-SM-1G is more affordable at £15–20 each, but still requires brand-specific purchasing. The XZSNET 2-pack at just £30.11 — compatible with Cisco, Ubiquiti, Mikrotik, and more — is one of the most cost-effective ways to add single-mode fibre connectivity to your network.
Key Specifications
- Standard: 1000BASE-LX
- Data rate: 1.25Gbps
- Fibre: Single-mode (SMF)
- Connector: LC duplex
- Wavelength: 1310nm
- Compatible with: Cisco GLC-LH-SMD, Ubiquiti UniFi UF-SM-1G, Mikrotik, Meraki, Netgear AGM732F, D-Link
- Pack: 2 modules
The Bottom Line
The XZSNET 1000BASE-LX SFP Transceiver 2-Pack is the cost-effective, multi-brand compatible fibre module for Gigabit Ethernet over single-mode fibre — works with Cisco, Ubiquiti, Mikrotik, Meraki, Netgear, and D-Link. At £30.11 for two modules, it’s the smart alternative to expensive proprietary transceivers.
0 comments